B. Ch. Nookaraju


Profile

B Ch Nookaraju , Associate Professor of Mechanical Engineering, completed his M.Tech. with specilisation, Thermal Sciences from National Institute of Technology Calicut Kerala and has over 15 years of academic and research experience in Indian universities. His Ph.D Pursuing on Thermal Performance of wicked Heat Pipes: Modeling, Simulation, analysis and optimization of Heat Pipes. Prior to M Tech, PhD, he had earned Bachelor of Engineering in Mechanical Engineering from Sagi Rama Krishna Raju Engineering College, Andhra University, Visakhapatnam.

B Ch Nookaraju, research interests include Testing of thermal performance in Heat Pipes for various wick structures and working fluids, Simulations with ANSYS FLUENT in Heat Pipes and optimization of Heat Pipes using Response Surface methodology technique. Experimental, Analytical and Finite difference Investigations of various wick structures and working fluids in which he has 15 publications, in various journals and conferences. He is currently working on composite wicks up to 500 watts of Heat energy recovery in electronics Cooling Applications. Finding Temperature distributions, heat transfer coefficients for different heat inputs and inclination angles.

RESEARCH PROJECT :

Completed Sponsored AICTE Project “ Thermal Hydraulics of Heat Pipe Heat Sinks For Electronics Cooling Application Under Research Promotion Scheme (RPS).”

Worth 6.00 Lakhs 2012-2014.(Co-investigator)

Contact details:

B.Ch.Nookaraju

Associate Professor

Mechanical Engineering Department

Gokaraju Rangaraju Institute of Engineering and Technology

Bachupally, Hyderabad, Telangana- 500090

Email: nookaraju@griet.ac.in

Mobile: 9866055979,9110352819

Curriculam Vitae

CV

Education

  • Ph.D (Pursuing), Mechanical Engineering, JNTUH, Hyderabad (2012-Till date)

Thesis Title: Thermal Hydraulics of Heat Pipe Heat Sinks using CFD analysis and Model Testing”

Supervisors: Dr PSV Kurmarao, GRIET & Prof. S Naga Sarada, JNTUH,Hyderabad.

  • MTech ., Thermal Sciences, NITC, Calicut, Kerala (2002-2004)

CGPA : 7.48

Dissertation Title : “Forced Convective Turbulent Heat transfer and Fluid flow analysis of Heated Rectangular blocks

encountered in Electronic Enclosures”

Supervisor : Dr. R. Vijaya Kumar, Professor NITC Calicut, Kerala

  • B.E, Mechanical Engineering SRKR Engg College, Bhimavaram, W.G. Dt, Andhra University, Vizag (1998-2002)

Percentage : 67.91

Project : Thermal Analysis of Steam Turbine at VTPS Vijayawada.2002

Supervisor : Dr. D Satyanarayana Raju, Professor SRKREC, Bhimavaram, WGDt

Professional Background:

  • Associate Professor (Mechanical Engineering), GRIET, Hyderabad, 10-07-2010 till date.
  • Senior Assistant Professor (Mechanical Engineering), GRIET, Hyderabad, 02-07-2008 to 01-07-2010
  • Assistant Professor (Mechanical Engineering), GRIET, Hyderabad,07-02-2005 to 30-06-2010
  • Adhoc Lecturer ((Mechanical Engineering), NITC, Calicut from 26-07-2004 to 30-01-2005

Administrative Experience:

  • National Board of Accreditation (NBA) Incharge for BTech (ME), Academic year 2017-18
  • National Board of Accreditation (NBA) Incharge for MTech (TE), Academic year 2016-17
  • Developed Research Test bed for Heat Pipes at GRIET, Hyderabad with AICTE funding
  • Worked as Head of the Department from 2014-2016
  • Additional Controller of Examinations (PG Studies) from 2011- 2013
  • National Board of Accreditation (NBA) Coordinator for BTech (ME), Academic year 2012-13

Courses taught

  • Engineering Thermodynamics
  • Fluid Mechanics & Hydraulic Machinery
  • Thermodynamics
  • Advances Fluid Mechanics
  • Heat Transfer
  • Refrigeration & Air Conditioning

Publications

Paper Presentations

International Journal Publications:

  • B.Ch.Nookaraju ,P S V Kurma Rao,Naga Sarada S, R Karthikeyan, A Vinay,2018, “Optimization of Process Parameters of Helical Grooved Heat pipe Using Response Surface Methodology”, International Journal of Materials Today, Elsevier Publication, Vol.5, Issue 2, Part 1, Pages 5262-5271
  • B.Ch.Nookaraju , PSV Kurmarao, S Nagasarada, 2017,“Experimental and Numerical investigation on enhancement in thermal characteristics of Sintered Copper wick Heat pipe using deionized water as fluid”, Elsievier Journal, Internal Journal of Materials Today Proceedings, Volume 4, Issue 2, Part -A, Pp:1321-1331.
  • B.Ch.Nookaraju , PSV Kurmarao, S Nagasarada, 2016, “Experimental and Numerical Analysis of Thermal Performance in Heat Pipes”, Internal Journal of Procedia Engineering, Elsievier Journal , Volume 127, Pp:800-808.
  • B.Ch.Nookaraju , PSV Kurmarao, S Nagasarada , 2015,Thermal Analysis of Gravity Effected Sintered Wick Heat Pipe, Elsievier Journal, Internal Journal of Materials Today Proceedings, Volume 2, Issue 4-5, Pp:2127-2187.
  • B.Ch.Nookaraju , PSV Kurma Rao, S Naga Sarada, T Sai Kiran, 2015 ‘ Experimental Investigations and Comparison of Heat Pipes’, International Journal of innovations in Engineering & Technology(IJIET) , Volume 5,Issue 3, June 2015, Pp. 128–137.ISSN No.2319-1058 (Impact Factor:0.672)
  • B.Ch.Nookaraju , PSV Kurma Rao, S Naga Sarada, H Prasanth, C Pradeep, 2015 ‘Experimental study on Sintered Copper Wick Heat Pipe at different Orientations’, International Journal of innovative Research in Advanced Engineering (IJIRAE) , Volume 2,Issue 5, May 2015, Pp. 176–180.ISSN No.2349-2163 (Impact Factor:1.893)

International Conferences attended and presented publications

  • B Ch Nookaraju , PSV Kurma Rao, S Naga Sarada, ‘Experimental and Numerical Analysis of thermal performance in Heat Pipes”, International Conference on Computational Heat and Mass transfer (ICCHMT-15), conducted by Department of Mechanical Engineering, National Institute of Technology, Warangal, 30 Nov- 2 Dec 2015, Code:1440054143
  • B.Ch.Nookaraju ,P S V Kurma Rao,Naga Sarada S, R Karthikeyan, A Vinay, “Optimization of Process Parameters of Helical Grooved Heat pipe Using Response Surface Methodology”, 7th International conference on Materials processing and Characterization, (ICMPC 2017), conducted by Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering & Technology, Bachupally, Hyderabad-Telengana -90, India, 17-19 March 2017, Paper ID:973
  • B Ch Nookaraju , PSV KurmaRao, S Naga Sarada, “Experimental and Numerical investigation on enhancement in thermal characteristics of Sintered Copper wick Heat pipe using deionized water as fluid, 5th International conference on Materials processing and Characterization, (ICMPC 2016), conducted by Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering & Technology, Bachupally, Hyderabad-Telengana -90, India, 17-19 March 2016.
  • B.Ch.Nookaraju , PSV Kurma Rao, S Naga Sarada, ‘Thermal Analysis of Gravity Effected Sintered Wick Heat Pipe’(ICMPC-2015) 4th International Conference on Materials Processing and Characterization”, conducted by Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engg & Technology, Hyderabad, India, 14-15 March, 2015, Code: MT-137

Professional Work

FDPs, Workshops & Seminars

  • NPTEL Online Certification in Advanced Fluid Dynamics, From January 2018 to April, 2018 Conducted by IIT Kharagpur.
  • Workshop on 3D Printing by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad from 6 August 2018 to 11 August 2018.
  • AICTE Approved Faculty Development Programme (FDP201x) on Pedagology for Online and Blended Teaching- Learning Process conducted by Indian Institute of Technology Bombay from 01 October, 2017 to 30 November, 2018.
  • Short Term Training Program on Advancements in Thermal Engineering (ATE – 2018) conducted by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad from February 19, 2018 to February 24, 2018.
  • AICTE Approved Faculty Development Programme (FDP101x) on Foundation Program in ICT for Education conducted by Indian Institute of Technology Bombay from August 03, 2017 to September 07, 2017.
  • Two day Workshop on Design Smarter using PTC Creo 4.0 organized by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad from November 07, 2017 to November 08, 2017.
  • One Week Self- Sponsored Short-Term Training Programme on Nano, Micro and Bulk Material Processing and Nanotechnology conducted by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad from March 20, 2017 to March 26, 2017.
  • Faculty Development Programme on Thermal and Fluids Analysis: CFD Approach (TFA – 2017) conducted by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad from February 27, 2017 to March 04, 2017.
  • A Short Term Training Programme on Modelling and Manufacturing conducted by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad from December 12, 2016 to December 17, 2016.
  • Faculty Development Programme on Advancements in MEMS and NEMS Technologies conducted by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad under TEQIP II from November 19, 2015 to November 21, 2015.
  • Faculty Development Program on Guide to a Passionate Teacher conducted by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad under TEQIP II from June 29, 2015 to July 04, 2015.
  • Faculty Development Programme on Additive Manufacturing conducted by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad under TEQIP II from March 25, 2015 to March 27, 2015
  • One week Faculty development programme on ‘Guide to a Passionate Teacger’ June 29,2015 to July4,2015, conducted by Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad.
  • One week Workshop on MEMS & NEMS(Design and Fabrication), from 15 December 2014 to 19 December 2014 conducted by IITH & Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad.
  • Two week ISTE MHRD’s National Mission for Teachers &Administrators Management Capacity Enhancement Programme, 16 June 2014 to 22 June 2014, Conducted by Indian Institute of Management, Indore, Madhya Pradesh.
  • Two week ISTE Workshop on Fluid Mechanics, 20 June 2013 to 30 June 2013, Conducted by IIT Kharagpur.
  • Two-week ISTE Workshop on Engineering Mechanics, 26 November 2013 to 6 December 2013, Conducted by IIT Kharagpur.
  • One Seminar on Advanced Trends in IC Engines &Combustion, on 28 February 2013 Conducted JNTU College of Engineering, JNTUH, Hyderabad.
  • Two-week ISTE Workshop on Introduction to Research Methodologies, 26 June 2012 to 4 July 2012, Conducted by Indian Institute of Technology Bombay.
  • Two-week ISTE Workshop on Engineering Thermodynamics, 11 December 2012 to 21 December 2012, Conducted by Indian Institute of Technology Bombay.
  • Three-day Short Course on Finite Element Method,19 December 2012 to 21Decemebr 2012, conducted by IIT Hyderabad.
  • A Workshop Mission 10X Workshop, 23 August 2011 to 27 August 2011, Conducted by Wipro Company.
  • An Automobile workshop and competition on Virtual Baja SAE India, 2 July 2010 to 3 July 2010, Conducted by SAE India, Delhi.
© Copyright 2018 - All Rights Reserved www.griet.ac.in